Description
Power supplies for laboratory use are mostly
only power sources. They are only able to deliver power with one
single polarity, i.e. these instruments only work in one quadrant of
the output voltage/ current diagram. Common amplifiers deliver
voltages with both priorities, but are generally unable to absorb
power values in a range comparable to that which they are able to
deliver. They therefore mainly work as two-quadrant devices. TOE
7610 series of four-quadrant amplifiers is able to work as a power
sink as well as a power source with equal values of delivered or
absorbed power.
The TOE 7610 series is thus a voltage amplifier, bipolar voltage and
current source, and current sink in one instrument. Having to
combine different instruments, where problems frequently occur with
the coordination of individual components and the tendency to
oscillate, now belongs to the past.
Features
- Power Manager - A selectable Power
Manager enables the maximum output power Pmax. to also be
processed as a continuous sink power. Numerous setting
options of the 4-quadrant amplifier allow optimum connection
of the amplifier with the seriesconnected driving equipment,
whether this is a laboratory power supply, a calibrator, a
function generator or a signal source from a PC in the form
of a D/A converter card.
- Selectable input impedance - The input
impedance can be switched between 50 Ohm and 100 kOhm and
allows convenient selection of a function generator to be
controlled and a signal source in the form of a D/A card in
the PC without the need for external adaptation.
- Selectable input voltage range - The
adjustable input voltage range allows switching between an
input voltage of ±5 V or ±10 V. Therefore no further
external adaptation of the control voltage is
necessary.
- Variable DC offset
- Brief load current - All 4-quadrant
amplifiers of the TOE 7610 series can be equipped with the
TOE 7610/103 option. They are then able to deliver three
times the rated current for approx. 3 ms.
- Output ON/OFF - A convenient detail of
the functionality is the output switch-off which allows
immediate switching-off of the voltage and current when in
the “Output OFF“ position.
Description
Power supplies for laboratory use are mostly
only power sources. They are only able to deliver power with one
single polarity, i.e. these instruments only work in one quadrant of
the output voltage/ current diagram. Common amplifiers deliver
voltages with both priorities, but are generally unable to absorb
power values in a range comparable to that which they are able to
deliver. They therefore mainly work as two-quadrant devices. TOE
7610 series of four-quadrant amplifiers is able to work as a power
sink as well as a power source with equal values of delivered or
absorbed power.
The TOE 7610 series is thus a voltage amplifier, bipolar voltage and
current source, and current sink in one instrument. Having to
combine different instruments, where problems frequently occur with
the coordination of individual components and the tendency to
oscillate, now belongs to the past.
Features
- Power Manager - A selectable Power
Manager enables the maximum output power Pmax. to also be
processed as a continuous sink power. Numerous setting
options of the 4-quadrant amplifier allow optimum connection
of the amplifier with the seriesconnected driving equipment,
whether this is a laboratory power supply, a calibrator, a
function generator or a signal source from a PC in the form
of a D/A converter card.
- Selectable input impedance - The input
impedance can be switched between 50 Ohm and 100 kOhm and
allows convenient selection of a function generator to be
controlled and a signal source in the form of a D/A card in
the PC without the need for external adaptation.
- Selectable input voltage range - The
adjustable input voltage range allows switching between an
input voltage of ±5 V or ±10 V. Therefore no further
external adaptation of the control voltage is
necessary.
- Variable DC offset
- Brief load current - All 4-quadrant
amplifiers of the TOE 7610 series can be equipped with the
TOE 7610/103 option. They are then able to deliver three
times the rated current for approx. 3 ms.
- Output ON/OFF - A convenient detail of
the functionality is the output switch-off which allows
immediate switching-off of the voltage and current when in
the “Output OFF“ position.
Special features
- 150 W source and sink power
- Brief load current 3 x Irated - Analog control input 0 to 5 V or 0 to 10 V
- ½ 19“ width, 3 HU parallel installation possible- Slew (rise) rate approx. 6 V/μs to 25 V/μs (depends on model)
- Sensing
- Output at front, optional at rear
- Optimally suitable for electrical noise testing of components against vehicle electrics ripple
