GWInstek

About GWInstek

Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.

After decades of experience in the test and measurement industry, GW Instek has grown to become one of the important manufacturers and developers of test and measurement instruments worldwide.

Today GW Instek has more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, basic test & measurement instruments to video surveillance systems. GW Instek has also seen its present growth internationally.

With headquarters located in Taipei, Taiwan, GW Instek has subsidiaries in mainland China, America, Japan, Korea, Malaysia, Europe, and India; its products are sold to more than 80 countries worldwide.

DAQ-9600

DAQ-9600 Data Acquisition System

  • Large 4.3”TFT color display
  • 3-slot mainframes with built-in 6 ½ digit DMM
  • Basic 0.0035% DCV
    accuracy

PEL-5000G Series High Power DC Electronic Load



PEL-5000G Series High Power DC Electronic Load

  • Master-slave control up to 1 Master and 7 Slaves
  • SEQ Load Mode's programmable function

GPM-8330/8320 Digital Power

GPM-8330/8320 Digital Power

  • 5”TFT LCD
  • Voltage/Current Test Freq. Bandwidth: DC, 0.1Hz~ 100kHz
  • Waveform Display : V (Voltage), I (Current), P (Wattage)
GSM-20H10 Precision DC Source Meter

GSM-20H10 Precision DC Source Meter

  • Maximum Output: ±210V/±1.05A/22W
  • Built-in 4 Sequence Output Modes, up to 2500 Points
  • OVP /OTP Protection Function
LCR-8200(A) High-Frequency LCR Meter

LCR-8200(A) High-Frequency LCR Meter

  • 7” LCD color Display
  • 0.08% Basic Accuracy
  • Displaying Four Measurement Results Simultaneously From 17 Selectable Measurement.

GPT-15000 Electrical Safety Analyzer

GPT-15012 Electrical Safety Analyzer



  • DC 12kV / IR 5kV
  • Comply with IEC 61010-2-034
  • 7” TFT LCD
  • Manual / Auto Mode
GPP-3060/6030 Multi-Channel Programmable DC Power Supply

GPP-3060/6030 Multi-Channel Programmable DC Power Supply

  • 4.3”TFT LCD Display
  • Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
  • Low ripple noise: ≦1mVrms/ ≦2mArms
ASR-6000 Series Programmable AC/DC Power Source

ASR-6000 Series High Performance AC/DC Power Source (5 kVA / 6.6 kVA)

  • AC input is three-phase only, phase voltage 380 V to 415 V±10 %)
  • Supports 1P2W, 1P3W, 3P4W output
  • Standard interfaces: RS-232C, USB, LAN
GDS-3102A & GDS-3104A Digital Storage Oscilloscopes

GDS-3102A & GDS-3104A 1 GHz Digital Storage Oscilloscope

  • Bandwidth: 1 GHz
  • Sample rate: 5 GSa/s
  • Channels: 2 or 4 Input Channels
  • Per Channel 200 Mpts Memory Depth
Products
Oscilloscopes
Digital Storage Oscilloscopes

GDS-3102A & GDS-3104A 1 GHz Digital Storage Oscilloscope

  • Bandwidth: 1 GHz
  • Sample rate: 5 GSa/s
  • Channels: 2 or 4 Input Channels
  • 800 x 480 TFT LCD Display

GDS-912 & GDS-912G Digital Storage Oscilloscope

  • Bandwidth: 100 MHz
  • Sample Rate: 1 GS/s
  • Channels: 2 Channels
  • Rise Time: ≤ 3.5 ns

MPO-2000 Series Multi-function Programmable Oscilloscope

  • MPO-2000P/B:200/100MHz; 4CH/2CH
  • Allow to use Python scripts to control for automation purpose
  • Dual Channel Spectrum

MDO-2000A Series Mixed-domain Oscilloscopes

  • 300/200/100MHz bandwidth selections ;2 channels
  • Real time sampling rate is 2GSa/s max.
  • Per Channel 20M memory depth and VPO waveform

GDS-3000 Series Digital Storage Oscilloscopes

  • 500/350/250/150MHz with 2/4 Channels
  • 5GSa/s RT or 100GSa/s ET Sampling Rate

GDS-2000A Series Digital Storage Oscilloscopes

  • 300MHz/200MHz/100MHz/70MHz Bandwidth ,2 or 4 Input Channel
  • 2GSa/s Real-time Sampling Rate and 100GSa/s Equivalent Time Sampling

MSO-2000E Series Mixed-signal Oscilloscopes

  • 200/100/70MHz bandwidth selections: 2 or 4 channels
  • MSO-2000E equips with a 16-channel logic analyzer
  • Waveform update rate up to 120,000 wfms/s

MDO-2000E Series Mixed-domain Oscilloscopes

  • 200/100/70MHz bandwidth selections ; 2 or 4 channels
  • Real time sampling rate for each channel is 1GSa/s (2 channel models)
  • Real time sampling rate is 1GSa/s (4 channel models)

GDS-2000E Series Digital Storage Oscilloscopes

  • 200/100/70MHz Bandwidth Selection; 2 or 4 Channels
  • 1GSa/s Real-Time Sampling Rate for Each Channel (2ch model);
  • Per Channel 10M Memory depth

GDS-1000B Series Digital Storage Oscilloscopes

  • 200/100/70MHz bandwidth selections, 2ch input
  • 100/70/50MHz bandwidth selections, 4ch input
  • 1GSa/s maximum sampling rate; 10M maximum memory depth for each channel


DC Power Supplies
Programmable & Single Channel DC Power Supplies

RBS Series

  • Bidirectional DC source, integrating power supply and load functions
  • Voltage output: 100 V, 500 V, 750 V, 1000 V, 1500 V, 2250 V

GPP-1205 & GPP-1323

  • Voltage Setting/Readback Resolution: 1 mV / 0.1 mV
  • Constant Voltage (CV) / Constant Current (CC) output mode
  • Bleeder circuit control

PHU Series

  • Voltage output: 80 V/ 200 V/ 500 V/ 750 V/ 1000 V / 1500 V
  • Power output: 5 kW/ 10 kW/ 15 kW
  • Maximum current output: 510 A

GPP-3610H/7250

  • Programming resolution: 1mV/ 0.2mA (GPP-3610H); 2mV/0.2mA (GPP-7250)
  • Readback resolution: 0.1mV/ 0.1mA

GPP-1326

  • 4.3”TFT LCD Display
  • Supports Setting Value, Measurement Value and Output Waveform Display
  • Load Function (CC, CV, CR Mode)

PPX-Series

  • CV, CC priority start function.
  • Delayed over-current protection(OCP Delay)
  • Power output ON/OFF delay function

PFR-100 Series

  • Constant Power Output for 5 Times Multi-range(V&I) Operation
  • Natural Convection Cooling Design (Fanless Structure)
  • CV, CC Priority Mode

PSU-Series

  • Voltage Rating: 6V/12.5V/20V/40V/60V/100V/150V/300V/400V/600V
  • Output Power Rating: 1200W~1560W

PSW-Series

  • Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W
  • Constant Power Output for Multiple Range (V&I)

PPH-1503

  • Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)
  • 3.5 Inch TFT LCD Display
  • Constant Voltage and Constant Current Operation

PSB-2000 Series

  • Output Voltage Rating : 80V/800V
  • Output Power Rating : 400W~800W
  • Constant Power Output for Multi-Range(V&I)Operation

PSS-Series

  • Digitized Programmable Interface
  • High Resolution 10mV, 1mA
  • High Stability, Low Drift

PSP-Series

  • LCD display
  • Output on/off control
  • 3-step fan speed control
Programmable & Multiple Channel DC Power Supplies

PSW-Multi series

  • CC/CV priority mode selection is ideal for battery and LED industries
  • Adjustable slew rate

GPP-3060/6030/3650

  • 4.3”TFT LCD Display
  • Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
  • Low ripple noise: ≦1mVrms

GPP-Series

  • 4.3”TFT LCD Display
  • Supports Setting Value, Measurement Value and Output Waveform Display
  • Load Function (CC, CV, CR Mode)

PPH-1503D/1506D/1510D

  • Dual Channel DC Power Output
  • PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A)
  • PPH-1506D (CH1: 0~15V/0~3A)

PPT-Series

  • Easy operation with UP/DOWN key
  • High Resolution: 10mV, 1mA
  • Over voltage protection, over current protection by hardware

GPD-Series

  • 2/3/4 Independent Isolated Output
  • 4 LED Display Sets: 3 digits after decimal point
  • 100mV/10mA(GPD-3303D)
Non-Programmable & Single Channel DC Power Supplies

GPE-1326A

  • 4.3 Inch LCD Display
  • Setting & Read back Resolution 10 mV / 2 mA
  • Analog Control (Remote I/O) for Output ON / OFF

GPE-1205 & GPE-1323

  • 2.4" TFT LCD
  • Encoder switch to set up voltage and current
  • Voltage readback resolution 100 μV

GPE-1326

  • 1 Independent Isolated Output
  • 4.3 Inch LCD Display
  • Setting & Read back Resolution 100mV / 10mA (*1)
  • Output ON / OFF

GPR-M Series

  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Internal Select for Continuous or Dynamic Load

SPS-Series

  • Dual Measurement Display
  • 0.01 % High Regulation
  • Constant Voltage and Constant Current Operation
  • High Efficiency
Non-Programmable & Multiple Channel DC Power Supplies

GPE-X323A Series

  • 2 / 3 / 4 independent isolated output
  • 4.3-inch LCD display

GPE-3060/6030

  • 1 / 2 / 3 independent isolated output
  • Output On / Off function

GPS-x303 Series

  • 4 Independent Isolated Output
  • Four "3 Digits" LED Displays
  • 0.01% Load and Line Regulation

GPE-x323 Series

  • 1 / 2 / 3 / 4 Independent Isolated Output
  • 4.3 Inch LCD Display

SPD-3606

  • Three independent
  • Isolated Output
  • CH3 adjustable output


Precision DC Source Meter

GSM-20H10

  • Maximum Output: ±210V/±1.05A/22W
  • Built-in 4 Sequence Output Modes, up to 2500 Points
  • OVP /OTP Protection